Paint Problem Solver
Color Charts
Gallery
PRODUCTS
OCTAGON Platinum Alkali Resisting Primer Interior
.jpg)
OCTAGON Platinum Alkali Resisting Primer Interior is a premium interior water-based acrylic primer that has excellent alkali resistance to alkali. This primer provides the best foundation for producing a smooth and luxurious paint finish and enhances the color of top coat. Suitable for new wall surfaces and also previously painted walls.
SPECIALTIES
- Low Odour
- Wide Coverage
- Excellent Alkali Resistance
- Excellent Adhesion
- Water Resistant
Product Packaging
1 lt, 3.5 lt, 20 lt
Tokopedia
Wall Condition During Painting
- Not recommended for application in areas with measured humidity exceeding 16% (measured with Protimeter). The wall must be allowed to dry. However, if painting is to be done, take note that humidity will increase behind this primer and over time will cause blisters to appear on the paint layer.
- Avoid painting if the alkali content is >pH9. Best condition to paint is pH 7 - 9.
- Avoid painting at air temperature below 10oC and air humidity above 85%.
Application
1. Surface preparation
Make sure the surface is free from dirt, dust, oil, and other defects. Clean all loose materials from inside cracks and open joints. If necessary, sand the surface with sandpaper and then clean the dust. Fill fine cracks/ hairline cracks with OCTAGON Climashield Exterior Putty.
2. Primer
Apply 1 (one) coat of OCTAGON Platinum Alkali Resisting Primer Interior without dilution using a brush or roller. If necessary, dilute with 5% clean water. Apply evenly and wait until dry.
3. Top Coat
The wall is ready to be painted. Apply 2 - 3 layers of OCTAGON Platinum Interior.
| Type | Acrylic Water Based |
| Appearance | Matt/ Doff |
| Color | White |
| Specific Gravity (temp. 30oC) | 1.25 +- 0.02 kg/lt |
| Volume of Solid | +- 32% |
| Thinning Ratio | Ready to use. Max 5% if necessary |
| Touch Dry (temp. 30oC) | +- 1 hour |
| Recoating Intervals | +- 2 hour |
| Method of Application | Brush, roller, spray |
| Theoretical Coverage | 8 - 10 m2/lt |
| Packaging | 3.5 lt, 20 lt |
*Varies with weather conditions, temperature, circulation, and humidity